Rub with a cloth dampened in a solution of detergent and warm water. If the stain remains, rub it with a different cloth dampened with denatured alcohol.
Asphalt Tile - Care and Cleaning
Care
Very hard, brittle tile, installed mostly in older buildings. Softened by grease so wipe up spills promptly. Also softened/dissolved by solvents, so do not use solvents, or solvent-based polishing waxes on it.
Cleaning
Asphalt tile is not damaged by alkali, so can you use alkaline cleaners on it. Damp mop as recommended for vinyl. When soil is not removed by damp-mopping, wash with detergent and water, or mild ammonia and water solution, and rinse well. Wax only with water-based wax.
Blood Stains on Hard Surface Floors
Mop or sponge with clear, cold water. If the stain remains, mop or sponge it with a solution of ammonia and cold water.
Cautions: When working with any chemicals, carefully read and follow the label directions for using that chemical, especially any cautions on safe use! With solvents, be very careful to have ventilation, and no flame or spark in area!
The first time you use any procedure on any floor, test it first on an out-of-the-way part of the floor to be sure it does not damage the flooring or finish.
Notes: If steel wool is suggested, use fine grade, 000 grade. Scouring powder will help remove many stains, but can also permanently scratch the floor.
If you decide to use it, use only a mild type, and be very careful about rubbing too much. Concentrated liquid commercial household cleaners, rubbed onto a stubborn spot, may remove it as well as scouring powders without the danger of scratching. Rinse off well. Do not use on wood floors.
Do not use water solutions, or cleaners which have to be rinsed off with water, on wood floors. Use a solvent or solvent-based cleaning wax.
After removing a stain, rinse the area thoroughly, dry completely, and, if floor finish has been removed in that area, recoat with appropriate finish or wax.
Candle Wax or Chewing Gum on Hard Surface Floors
Freeze the material to brittleness by using ice cubes. Then scrape the material off the floor with a plastic spatula.
Cautions: When working with any chemicals, carefully read and follow the label directions for using that chemical, especially any cautions on safe use! With solvents, be very careful to have ventilation, and no flame or spark in area!
The first time you use any procedure on any floor, test it first on an out-of-the-way part of the floor to be sure it does not damage the flooring or finish.
Notes: If steel wool is suggested, use fine grade, 000 grade.
Scouring powder will help remove many stains, but can also permanently scratch the floor. If you decide to use it, use only a mild type, and be very careful about rubbing too much.
Concentrated liquid commercial household cleaners, rubbed onto a stubborn spot, may remove it as well as scouring powders without the danger of scratching. Rinse off well. Do not use on wood floors.
Do not use water solutions, or cleaners which have to be rinsed off with water, on wood floors. Use a solvent or solvent-based cleaning wax.
After removing a stain, rinse the area thoroughly, dry completely, and, if floor finish has been removed in that area, recoat with appropriate finish or wax.
next pageThe Author:
Anne Field, Extension Specialist, with credit to MSU Extension